Proper cleaning method for concrete mixer
Submitted by Eliza,09/23/2015Concrete mixers have many cleaning methods. Because the mixing form and the roller of concrete mixer are different, so the precautions of cleaning are also not same.
Concrete mixer mainly include: JZC series of drum type concrete mixer, the main types are: JZC300/JZC350A/500 bucket roller type concrete mixer, JZC350B improving the roller type concrete mixer, JZC750 roller type concrete mixer, JZC350 diesel engine cylinder type concrete mixer, JZC300 ladder roller concrete mixer. JZM series of friction roller type concrete mixer, the main types are: JZM350/JZM500 mobile friction roller type concrete mixer, JZM750 fixed friction roller type concrete mixer. JDC single horizontal shaft forced concrete mixer, the main types are: JDC350/JDC500 enhancing the forced concrete mixer, which are also known as the single horizontal axis forced concrete mixer. JS series of double horizontal shaft forced type concrete mixer, main types are: JS500, JS750, JS1000, JS1500, JS2000 double horizontal shaft forced type concrete mixer, which are also known as the used concrete mixer for the project. The above is the model of the concrete mixer, when cleaning, it need to pay attention to the following matters.
The cleaning method of concrete mixer: putting the water and gravel into the mixing cylinder about 10~15 minutes to wash after the suspension, and then clearing out the water and gravel. The operator must be in the mixing barrel for cleaning, in addition to cut off the power supply and remove the fuse, and to lock the switch box. If there is accumulated concrete in the concrete mixer drum, it is strictly prohibited to clear out the concrete with a sledgehammer, it can be cleared out only with a chisel removal. Another important thing is that in the cold season, after the work, it need to wash the mixer drum and pumps with water, and release the water clearly so as to avoid freezing.